Now showing 1 - 10 of 42
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
      14
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
    Numerical investigation of velocity and temperature distributions in thermoacoustic stacks
    (Leykam, 2021)
    Energy conversion based on the interaction of acoustic fluctuations in thermal and viscous boundary layers offers a promising possibility for reducing fossil energy resources. Machines based on this so-called thermoacoustic effect can be used as heat engines as well as heat pumps or refrigerators. However, the problem with the implementation of such systems is the insufficient understanding of the various phenomena (e. g. turbulence) of thermally excited flows. Numerical methods, such as CFD, are established for the optimization and further development of thermoacoustic systems due to increasing computational capacities. The foundation for optimizations is a reliable and realistic prediction of the flow and heat transfer process in thermoacoustic systems. Therefore, in this study, different approaches based on the RANS equations are investigated with the use of the CFD code ANSYS Fluent®. In addition to two standard eddy-viscosity models, two model extensions are implemented in the CFD code. Extensive measurement data based on time-resolved laser-assisted flow measurements are used for the validation of the investigated turbulence models. As the studies show, the standard eddy-viscosity models provide a good prediction of the velocity and temperature profiles. However, it can be pointed out that both the elliptic relaxation model (V2F) and the local formulation of the Transition SST model bring an improvement, especially in the interpretation of non-linear effects.
      1  188
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
      17
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
      8
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
    Optimizing district heating in a fully renewable energy system: An Austrian case study
    (Elsevier BV, 2026-03)
    Timmons, David
    ;
    ;
    Kumar, Shravan
    ;
    ;
    Scopus© Citations 1  20
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
    Intelligent Energy and Climate Strategies : Energy - Buildings - Environment
    (University of Applied Sciences Burgenland, 2026)
    e-nova International Conference 24.-25. June 2026
      26
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
    Exergie Trafos zum Heizen und Klimatisieren durch Fernwärme
    (2024-10)
    ;
    Kührer, Alexander
    ;
    ;
    ;
    Beckmann, Georg 
      10
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
    RaCiA - Rankine Cycle für industrielle Abwärmen
    (Klima- und Energiefonds, 2016-01-16)
    Beckmann, Georg 
    ;
    ;
    ;
    Die Nutzung von Abwärme, insbesondere durch Verstromung, gewinnt zunehmend an Bedeutung für die Steigerung der Energie-Effizienz und die Reduktion von Treibhausgasen. Das Projekt „RaCiA – Rankine Cycle für industrielle Abwärmen“ soll die Industrie dabei unterstützen, Prozess-Abwärme vermehrt zu nutzen. Es gibt eine Reihe von Konzepten und Anlagen zur Abwärme- Verstromung, die nach dem Prinzip der Wärmekraftmaschine funktionieren, wie etwa Dampfkraft- oder ORC- Prozesse. Dennoch ist die breite Umsetzung der Abwärme- Nutzung durch Verstromung in der Industrie noch nicht in Schwung gekommen. Das Sondierungsprojekt RaCiA zielt darauf ab, die Energieeffizienz durch die Verstromung von Low-Exergy-Quellen zu steigern. Entwickelt wurde ein neuartiger Dampfprozess zur Verstromung von Abwärme mit dem niedrigen Temperaturniveau zwischen 140 °C und 550°C. Das patentierte Verfahren verwendet das Prozessmedium Wasser und basiert auf einer mehrstufigen Flash-Verdampfung. Das Prozessdesign ermöglicht das Einbinden von Niedertemperatur- Abwärmen mit unterschiedlichen Temperaturniveaus. Auf Basis von thermodynamischen Prozesssimulationen und einer ökologischen Bewertung wurde der neuartige Prozess optimiert und mit State-of-the-Art Prozessen verglichen. Das Ergebnis zeigt deutliche Vorteile des neuartigen Prozesses gegenüber Vergleichsprozessen (z.B. dem ORC- Prozess) sowohl in Effizienz als auch in ökologischer Sicht. Zum Beispiel könnte im betrachten Fall der Nutzung der Abluft aus Klinkerkühlern in Zementwerken die durch den neuartigen Prozess erzeugte Stromproduktion im Vergleich zu einem herkömmlichen ORC- Prozess um rund 29% gesteigert werden.
      1  295
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
      1  146
  • Thumbnail Image
    Some of the metrics are blocked by your 
    Item type:Publication,
    Untersuchung eines Elektroabscheiderkonzepts zur Reduktion von Staubemissionen
    (Leykam, 2020-11-26)
    ;
    ;
    ;
    Particulate emissions are formed during the combustion of biogenic fuels depending on the type of furnace, the operating conditions in terms of the combustion quality and the different fuel properties. The release of especially small particles often leads to health problems such as the development or worsening of lung diseases. Downstream electrostatic precipitators (ESP) represent a state of the art separation technology in medium and large biomass plants. However, these precipitators are often difficult to implement in smaller furnaces due to economic aspects and space constraints. This study deals with the integration and experimental investigation of an ESP system into the boiler body of a small scaled biomass furnace (< 100 kW). In Addition to the full load behaviour of the firing system, further test arrangements with different part load conditions of the boiler are being considered in order to analyse the particle precipitation under realistic plant operation with regard to flue gas properties and flow conditions. Furthermore, different fuels are considered. Both, discontinuous as well as time-resolved aerosol measuring methods are used to determine particulate matter emissions. The results of the discontinuous dust measurements show that with the integrated ESP, at least 50 % of the particles in the fine dust range are separated, both at full and partial load operation of the boiler, irrespective of the fuel used. Furthermore, it is shown that partial load conditions favour the separation efficiency due to low velocities and low temperatures of the gas flow over the discharge electrode, which is situated in the reversing chamber. Accordingly, the separation efficiency in part load is between 65 and 85 %, depending on fuel used. In order to enable a more precise observation of the separation behaviour with regard to particle size, additional continuous ELPI (electrical low pressure impactor) measurements are carried out for a selected fuel (wood chips). These measurements show that for small particle collectives (dP < 1 μm) separation efficiencies of over 55 % (full load) and over 80 % (part load) are achieved.
      5771  215